Ping Glide 3.0 Wedge Mens Right Hand

Due to PING Internet Trading Policy we are unable to sell Ping Products online. For more information and to purchase this product please contact our store for any other information 0906433616

• 

  Feel, Forgiveness

  A larger, softer elastomer Custom Tuning Port insert covers more of the back of the face, activating at impact to produce a soft yet solid feel. The new cavity design and larger CTP expand the perimeter weighting to increase the MOI and position the center of gravity higher to yield lower-launching, higher-spinning trajectories for more control.
• 

  Precision-Milled Grooves

  Patented wheel-cut grooves have a sharper edge radius to increase interaction with the ball at impact, creating more friction for improved spin and trajectory control. The higher-lofted versions (54°, 56°, 58° & 60°) feature an extra ½ groove at the bottom of the face to impart more spin, especially around the greens.
• 

  Players-Style Look

  The Glide 3.0 wedge blends a players-style look with game-improvement technology. At address, it presents the clean appearance of a tour-style wedge. Offset was added based on tour player feedback to provide a more captured look.
• 

  Classic, Proven Performer

  The Eye2’s iconic design has been helping golfers get out of the sand and tough spots and saving them strokes for decades. Its pioneering high toe and exacting geometries are engineered to ensure consistency and improve your short-game performance.
• 

  Eye2 Sole Grind

  This grind matches founder Karsten Solheim’s original groundbreaking Eye2 SW sole and face profile, offering a narrow hosel transition and progressive lead edge for the ultimate in bunker performance and touch shots around the green.
• 

  Standard Sole (SS) Grind

  This mid-bounce sole with heel relief will fit most golfers. Engineered for players with a moderate angle of attack. Provides exceptional performance in a variety of turf and sand conditions.
• 

  Wide Sole (WS) Grind

  The most forgiving sole through the ground as it is round and cambered with significant bounce. Recommended if you have a steep angle of attack and you typically play in soft turf and sand conditions.
• 

  Thin Sole (TS) Grind

  The thin-sole grind facilitates precise shot-making and versatility from tight lies. Features extreme heel relief with a PING WRX-inspired bounce grind, making it ideal for firm conditions and a shallow angle of attack.
• 

  Full Shots

  The grooves in the lower-lofted wedges (46°, 50° & 52°) are milled with a 20° sidewall and a .005″ edge radius for optimal full-shot performance.
• 

  Around the Green

  The higher-lofted versions (54°, 56°, 58° & 60°) are milled to a .004″ edge radius with a 28° sidewall to impart more spin, especially around the greens.
• 

  Lighter, More Control

  The Glide 3.0 wedge’s grip and shaft are lighter, contributing to an overall weight reduction for the entire club. The Dyla-wedge Lite grip is ¾-inch longer than a traditional grip with reduced taper, allowing you to choke down for more versatility and trajectory control. The PING Z-Z115 wedge shaft is made by Nippon and custom engineered with a lower balance point closer to the tip to provide lower launch with more control and enhanced feel.

  Glide 3.0

  Specifications

  CLUB	LOFT	LENGTH	LIE ANGLE	OFFSET	EFFECTIVE BOUNCE	SWINGWEIGHT
  46/SS	46.0°degrees	35 1/2″1/2	64.1°degrees	0.09″Ping.Clubs.Specs.Offset.Units	12.0°degrees	D2
  50/SS	50.0°degrees	35 1/2″1/2	64.1°degrees	0.08″Ping.Clubs.Specs.Offset.Units	12.0°degrees	D2
  52/SS	52.0°degrees	35 1/2″1/2	64.1°degrees	0.08″Ping.Clubs.Specs.Offset.Units	12.0°degrees	D2
  54/SS	54.0°degrees	35 1/4″1/4	64.4°degrees	0.08″Ping.Clubs.Specs.Offset.Units	12.0°degrees	D3
  54/Eye2	54.0°degrees	35 1/4″1/4	64.4°degrees	0.10″Ping.Clubs.Specs.Offset.Units	10.0°degrees	D3
  54/WS	54.0°degrees	35 1/4″1/4	64.4°degrees	0.08″Ping.Clubs.Specs.Offset.Units	14.0°degrees	D3
  56/SS	56.0°degrees	35 1/4″1/4	64.4°degrees	0.08″Ping.Clubs.Specs.Offset.Units	12.0°degrees	D3
  56/WS	56.0°degrees	35 1/4″1/4	64.4°degrees	0.08″Ping.Clubs.Specs.Offset.Units	14.0°degrees	D3
  56/Eye2	56.0°degrees	35 1/4″1/4	64.4°degrees	0.10″Ping.Clubs.Specs.Offset.Units	10.0°degrees	D3
  58/SS	58.0°degrees	35″	64.6°degrees	0.07″Ping.Clubs.Specs.Offset.Units	10.0°degrees	D4
  58/TS	58.0°degrees	35″	64.6°degrees	0.07″Ping.Clubs.Specs.Offset.Units	6.0°degrees	D4
  58/WS	58.0°degrees	35″	64.6°degrees	0.08″Ping.Clubs.Specs.Offset.Units	14.0°degrees	D4
  58/Eye2	58.0°degrees	35″	64.6°degrees	0.10″Ping.Clubs.Specs.Offset.Units	8.0°degrees	D4
  60/SS	60.0°degrees	35″	64.6°degrees	0.07″Ping.Clubs.Specs.Offset.Units	10.0°degrees	D4
  60/TS	60.0°degrees	35″	64.6°degrees	0.07″Ping.Clubs.Specs.Offset.Units	6.0°degrees	D4
  60/WS	60.0°degrees	35″	64.6°degrees	0.08″Ping.Clubs.Specs.Offset.Units	14.0°degrees	D4
  60/Eye2	60.0°degrees	35″	64.6°degrees	0.10″Ping.Clubs.Specs.Offset.Units	8.0°degrees	D4